Electronic Speed Control สำหรับเฮลิคอปเตอร์ Specification 1. Brake: ON/OFF 2. Battery type: NiCad/NiMh ,LiPo , LiFe (A123) 3. Low Voltage Protection Threshold ( Cutoff Threshold ) 4. Restore factory setup defaults: 5. Timing setup : Automatic/ Low / High. 6. Soft Acceleration Start ups: Very Soft / Soft / Hard 7. Active RPM Control 8. Motor Rotation 9. Switching Frequency : 8kHz/16kHz 10. Low Voltage Cutoff Type : Reduce Power / Hard cutoff
Spec. Weight: 63g Size: 55x35x8mm Cells: 6-20Ni MH ~ 2-7S Li Po Max Current: 50A Burst: 60A No BEC Timing: 1/7/15/30 programmable PWM: 8/16K
Features.
Constant current 50A Max 60A <10S Li-Poly 2-7 cells Ni-MH 6-20 cells Low Resistant 0.0014 Ohms; Dynamic Braking BEC: opto Auto shut down when lose signal Slow down at 3.0V per cell Lipo, Cut-off at 2.9V per cell Lipo 0.8V NiMh
User Programming options:
Battery settimg Throttle Range Brake setting 4 options:
Direction and Cutoff Type Timing Mode Setting: 1 / 7 / 15 / 30 PWM setting: 8K/16K
