ESC is compatible with both sensorless and sensored brushless motors (only in sensorless mode).
Fully waterproof design for all conditions.
Super internal switch-mode BEC with switchable voltage of 6V/7.4V for usage with high torque and high voltage servos.
Motor Thermal Protection: It will be available after you plug the temperature monitoring cable on the ESC into the temperature monitoring port (marked with “TEMP”) at the bottom of the matching HOBBYWING motor.
Highly reliable electronic switch design prevent mechanical switch failure due to dirt, water, dust and etc.
Separate programming port to easily connect the LED program card or the LCD program box to the ESC.
Proportional brake with 9 levels of maximum brake force and drag brake force.
5 levels of acceleration/punch from soft to aggressive for different vehicles, tires and tracks.
Capacitor Protection:Innovative Capacitor Protection effectively protects capacitors from exploding and causing irreversible damage to the ESC from overloading.
Multiple protections: motor lock-up protection, low-voltage cutoff protection, thermal protection, overload protection, and fail safe (throttle signal loss protection).
Single-button ESC programming and factory reset.
Advanced programming via portable LED program card, multifunction LCD program box or WiFi module.
Firmware upgrade via HOBBYWING multifunction LCD program box or WiFi module (item sold separately).
Specifications
Cont./Peak Current: 120A/830A
Motor Type: Sensorless / Sensored Brushless Motor (only in sensorless mode)
Applications: 1/10th Short Course Truck,Truck and Monster Truck
Motor Limit: Brushless Motor Limit with 2S LiPo / 6 Cell NiMH: KV≤6000 (3656 size motor)
Brushless Motor Limit with 3S LiPo / 9 Cell NiMH: KV≤4000 (3656 size motor)
Brushless Motor Limit with 4S LiPo / 12 Cell NiMH: KV≤3000 (3656 size motor)
LiPo /NiMH Cells: 2-4S LiPo/6-12S NiMH
BEC Output: 6V/7.4V Switchable, Continuous Current of 4A (Switch-mode)
Cooling Fan: Powered by the stable BEC voltage of 6V/7.4V
Connectors: Input End: No Connectors.
Output End: 4.0mm Female Gold Connectors (pre-soldered onto the PCB of the ESC).